Custom Industrial Chiller Datasheets
Reference technical data for project-specific industrial chiller systems, including high ambient, explosion-proof, stainless steel, low temperature, mobile, solar, and special process cooling configurations.
Custom industrial chillers are selected when standard air cooled or water cooled models cannot fully match the operating condition, installation environment, process temperature, material requirement, voltage, or control system requirement.
Quick Answer: What Is a Custom Industrial Chiller Datasheet?
A custom industrial chiller datasheet is a project-specific technical document prepared according to the real operating conditions. It usually includes cooling capacity, chilled water temperature, flow rate, pump pressure, compressor configuration, heat exchanger material, tank design, voltage, control system, installation environment, and special customization items.
Not a Fixed Model Sheet
Custom chillers are reviewed according to project conditions rather than only selected from a standard model table.
Engineering Data Required
Heat load, target temperature, fluid, pump pressure, ambient condition, and voltage must be confirmed.
Final Datasheet After Review
Final specifications should be prepared after reviewing actual process and installation requirements.
Custom Industrial Chiller Datasheet Configuration Matrix
Use this matrix to understand which custom chiller specifications should be reviewed before requesting a project-specific industrial chiller custom datasheet.
| Custom Chiller Type | Typical Use | Key Datasheet Items | Selection Notes |
|---|---|---|---|
| High Ambient Air Cooled Chiller | Outdoor or hot-climate industrial process cooling. | Ambient temperature, condenser size, compressor selection, cooling capacity correction, ventilation requirement. | Capacity must be checked at high ambient temperature such as 45°C, 50°C, or project-defined condition. |
| Explosion-Proof Industrial Chiller | Hazardous areas, chemical plants, dust or gas risk environments. | Explosion-proof electrical components, control panel, motor protection, installation zone, safety requirement. | Explosion-proof grade and site classification must be confirmed before design. |
| Stainless Steel Industrial Chiller | Food, chemical, corrosion-sensitive, clean process cooling. | Stainless steel tank, stainless steel piping, heat exchanger material, fluid compatibility, water quality. | Confirm corrosion risk, cleaning requirement, fluid type, and process hygiene level. |
| Low Temperature Industrial Chiller | Special process cooling below standard chilled water range. | Outlet temperature, glycol ratio, evaporator protection, compressor, refrigerant, anti-freeze control. | Cooling capacity must be recalculated at low outlet temperature. |
| Mobile Industrial Chiller | Temporary cooling, test station cooling, flexible workshop cooling. | Caster structure, compact frame, tank volume, pump pressure, power connection, hose interface. | Confirm mobility requirement, site movement frequency, and installation space. |
| Solar Industrial Chiller | Remote area, outdoor process cooling, solar-supported equipment cooling. | Solar power condition, battery or grid backup, compressor type, controller, operating schedule. | Confirm whether the system is solar-assisted or fully solar-powered. |
| Skid-Mounted Chiller System | Integrated process cooling package for industrial equipment or production line. | Frame design, pump system, tank, control cabinet, piping interface, lifting point. | Confirm equipment layout, transport size, installation method, and maintenance access. |
| Special Voltage Chiller | Export projects with country-specific electrical systems. | Voltage, phase, frequency, electrical components, compressor compatibility, control transformer. | Confirm voltage before quotation and production. |
Reference Datasheet Tables
These compact reference tables show the type of custom chiller specifications commonly reviewed before a final project-specific datasheet is prepared.
| High Ambient Custom Chiller Datasheet Reference | ||
|---|---|---|
| Item | Reference Data | Project Review Notes |
| Ambient Temperature | 40°C / 45°C / 50°C / project-defined | Confirm site condition and ventilation path. |
| Cooling Capacity | Corrected by ambient and outlet water temperature | Capacity should not be copied from standard rating only. |
| Condenser | Larger air cooled condenser or high ambient design | Airflow clearance must be reviewed. |
| Compressor | Project-selected compressor type | Selected according to operating condition. |
| Installation | Outdoor or semi-outdoor installation | Service access and hot air recirculation should be checked. |
| Explosion-Proof Chiller Datasheet Reference | ||
|---|---|---|
| Item | Reference Data | Project Review Notes |
| Application Area | Chemical plant, coating line, hazardous workshop | Actual site classification is required. |
| Explosion-Proof Requirement | Project-defined electrical protection | Final requirement depends on local standard. |
| Control Panel | Explosion-proof or remote-mounted panel | Panel layout should be reviewed by project. |
| Motor / Pump | Protected electrical configuration | Confirm area, voltage, and protection level. |
| Selection Note | Site classification before final datasheet | No final design should be assumed without review. |
| Stainless Steel Custom Chiller Datasheet Reference | ||
|---|---|---|
| Item | Reference Data | Project Review Notes |
| Tank | Stainless steel tank available | Material depends on water quality and process. |
| Piping | Stainless steel piping available | Confirm corrosion and cleaning requirements. |
| Evaporator | Stainless plate or shell-and-tube option | Match fluid compatibility and maintenance approach. |
| Fluid | Water, glycol solution, process fluid | Fluid type should be project-reviewed. |
| Selection Note | Fluid compatibility and water quality | Material selection should be confirmed before quotation. |
| Low Temperature Custom Chiller Datasheet Reference | ||
|---|---|---|
| Item | Reference Data | Project Review Notes |
| Outlet Temperature | Below standard chilled water range | Target temperature must be confirmed. |
| Fluid | Glycol solution for anti-freeze protection | Concentration depends on setpoint. |
| Evaporator | Protected design by temperature and fluid | Freezing risk should be reviewed. |
| Compressor | Selected by low temperature operating condition | Capacity changes at low temperature. |
| Control | Anti-freeze, temperature, and flow protection | Control logic should match the process risk. |
How to Read a Custom Industrial Chiller Datasheet
A custom chiller datasheet should be read as an engineering reference. The final values depend on actual process data and installation conditions.
Cooling Capacity
Cooling capacity should be checked at the required chilled water outlet temperature and real ambient or condenser condition.
Temperature Range
The datasheet should clearly show the chilled water outlet range and whether glycol is required.
Pump Flow and Pressure
Pump selection depends on pipe distance, pressure loss, height difference, valves, filters, and equipment resistance.
Material Selection
Tank, piping, evaporator, and condenser materials should match fluid quality, corrosion risk, and process requirement.
Electrical System
Voltage, phase, frequency, control voltage, and electrical protection must match the project site.
Custom Options
Special structure, PLC control, Modbus communication, remote control, skid frame, stainless steel parts, and special condenser design can be reviewed.
Common Custom Options for Industrial Chiller Datasheets
These industrial chiller custom options are often reviewed when standard model data cannot fully describe the project condition.
| Custom Option | Purpose | Datasheet Information Required |
|---|---|---|
| Stronger Pump | Support long piping, higher pressure loss, or equipment resistance. | Flow rate, pressure, pipe length, height difference. |
| Larger Buffer Tank | Improve temperature stability or handle load fluctuation. | Process volume, load fluctuation, temperature tolerance. |
| Stainless Steel Water Circuit | Support clean, food, chemical, or corrosion-sensitive applications. | Fluid type, water quality, corrosion risk. |
| PLC Control | Advanced control, monitoring, and integration. | Control logic, signal requirement, communication protocol. |
| Modbus Communication | Connect chiller with production line or factory control system. | Protocol, signal list, control requirement. |
| Special Voltage | Export or site-specific electrical system. | Voltage, phase, frequency, country, site power condition. |
| Outdoor Structure | Outdoor installation or harsh environment. | Ambient temperature, rain protection, ventilation, site layout. |
| Skid-Mounted Frame | Integrated process cooling package. | Transport size, lifting method, connection interface. |
Typical Applications for Custom Industrial Chillers
Custom process chiller technical data is often reviewed when the application has special temperature, material, installation, voltage, safety, or control requirements.
Thermal Spray Cooling
Custom chillers are often used when thermal spray systems require stable cooling for power supply, spray gun, auxiliary circuits, and continuous operation.
View Application →Chemical Process Cooling
Custom material, stainless steel water circuit, explosion-proof design, or special temperature control may be required.
View Application →Electroplating Cooling
Custom heat exchangers and corrosion-resistant components may be required according to solution type and site condition.
View Application →Die Casting Cooling
High heat load, continuous operation, and harsh workshop conditions may require project-specific chiller design.
View Application →Laser Cooling
Special temperature stability, clean water circuit, compact structure, or custom voltage may be reviewed.
View Application →Injection Molding Cooling
Custom pump, tank, and central cooling structure may be required for multiple machines or production lines.
View Application →Information Needed Before Requesting a Custom Chiller Datasheet
Share the following project data so APT can prepare a more useful custom industrial chiller datasheet for engineering review and quotation discussion.
- Required cooling capacity or process heat load
- Chilled water inlet and outlet temperature
- Required water flow rate
- Pump pressure or pipe system information
- Fluid type and concentration
- Ambient temperature or condenser water condition
- Application equipment type
- Installation location
- Voltage / phase / frequency
- Continuous or intermittent operation
- Material requirement
- Control and communication requirement
- Special environment requirement
- Space or structure limitation
- Photos, drawings, or process diagram if available
Related Technical Datasheet Pages
Continue from the custom datasheet page to related datasheet categories and engineering reference pages.
Industrial Chiller Technical Datasheets
Review the main datasheet category page for APT industrial chiller technical resources.
Air CooledAir Cooled Industrial Chiller Datasheets
Compare air cooled capacity ranges, airflow direction, installation notes, and model data.
Water CooledWater Cooled Industrial Chiller Datasheets
Review water cooled chiller data for condenser water, tower-based systems, and larger loads.
ComponentsChiller Parts & Heat Exchanger Datasheets
Check component and heat exchanger reference information for custom system matching.
Export ReferenceIndustrial Chiller Export Voltage Reference
Review voltage, phase, frequency, and electrical reference notes for export projects.
Product DirectionCustom Industrial Chiller Solutions
Move from datasheet review to custom chiller product directions and project examples.
Custom Industrial Chiller Datasheet FAQ
Common questions about project-specific industrial chiller datasheets and custom chiller specifications.
What is included in a custom industrial chiller datasheet?
A custom industrial chiller datasheet usually includes cooling capacity, chilled water temperature, water flow rate, pump pressure, compressor configuration, evaporator type, condenser design, tank material, voltage, control system, installation notes, and special customization items.
When do I need a custom industrial chiller instead of a standard model?
A custom chiller is usually needed when the project has special temperature, high ambient condition, hazardous area requirement, stainless steel material requirement, special voltage, limited space, outdoor installation, or special control requirement.
Are custom chiller datasheet values fixed?
No. Custom chiller datasheet values should be reviewed according to actual heat load, target temperature, fluid, ambient condition, pump requirement, voltage, and installation environment.
Can APT provide high ambient industrial chillers?
Yes. APT can review high ambient air cooled chiller designs for hot climates or outdoor industrial installations where condenser capacity and airflow must be checked carefully.
Can APT provide explosion-proof industrial chillers?
Yes. APT can review explosion-proof chiller requirements for hazardous or special industrial environments after confirming the site classification and electrical protection requirements.
Can stainless steel parts be used in custom chillers?
Yes. Stainless steel tanks, piping, and heat exchanger options can be reviewed for food, chemical, clean process, or corrosion-sensitive applications.
Can pump flow and pressure be customized?
Yes. Pump flow and pressure can be selected according to pipe distance, pressure loss, height difference, valves, filters, and process equipment resistance.
Can custom chillers support special voltage?
Yes. APT can review special voltage and frequency requirements for export projects, including country-specific electrical systems.
What information is needed before preparing a custom datasheet?
APT usually needs cooling capacity, inlet and outlet temperature, flow rate, fluid type, pump pressure, voltage, ambient condition, application equipment, installation environment, and any special material or control requirements.
Can APT prepare a project-specific custom chiller datasheet?
Yes. APT can prepare a project-specific custom industrial chiller datasheet after reviewing the actual process cooling requirements and installation conditions.
Request a Project-Specific Custom Chiller Datasheet
Send your cooling capacity, target temperature, flow rate, pump pressure, fluid type, voltage, application, and installation details. APT engineers can review whether a custom industrial chiller datasheet is needed for your process cooling project.